When installing new windows, choosing the proper frame style is important!

Last week, when installing new windows selecting the proper frame style, I told you just how to measure for your own vinyl replacement windows when replacing aluminum windows. Now that you’rewilling to order your brand-new vinyl replacement windows, we should talk about the different frame style options available. New construction frameshave a nailing fin to attach the frame to the studs throughout the construction ofthe house that is new. But inthe west, where stucco homes are typical, producers came up with a third type of frame called a retrofit frame. The retrofit framework has afin about 2 inches wide, located flush with all the outside face of the window. This is the best choice when replacing old windows, butnot all occupations will accomodate a retrofit frame program. Thereforelet us discuss how you can discover which frame is going to work for you. When youhave a stucco outside, retrofit is the approach to take.

Then you twist the newest window in using deck screws through the most effective header together with the side stations. We’ll get into more detail on theauthentic installment in a future post. Should you have a stuccooutside, however there is a wood where the flush fin would usually go,trim throughout the opening of the window, you can still use the retrofit design frame. Install the retrofit window you would need toeliminate the wood surrounding the opening, then buy and install new wood trim. Considering that the retrofit window frame dimensions will likely be bigger in height and width compared to old window frame the old trim will no longer fit. Another option would be toput in the retrofit fin together with the wood trim. You can do it as long as the depth in the face of the wood trim to the point in the home of the innermost part of the old aluminum frame is less than 3 inches deep. The reason is because a high quality retrofit window will have a 3 inch frame depth in therear of the flush fin to the innermost section of the frame. That innermost part must be further intothe house than the innermost area of the aluminum frameafter we implement the interior trim, so that the aluminum frame is going tobe concealed.

What for those who have brick around the window openings?
Or siding?
Then what?

Well, if you possess the innermost portion of the vinyl frame be further in the dwelling than the old framework but still can install the window from the face of the brick or siding, then you definitely may use the retrofit design frame. If not, then you must make use of the replacement style frame,then use trim to finish the exterior. If you’re in a position to get a retrofitframe having a relatively narrow fin, you can even trim the finsdown so the window fits between the brick or wood. That could get rid of the necessity to trim the exterior out. Somemakers of frames that are retrofit could have grooves in thetrunk of the fins that are retrofit. Until you’re in a position to break off that bit of the fin,a utility knife simply runs in the groove.

Siding Company St.Louis MO

The key point to keep in mind when deciding whether to use a retrofit framework or a regular replacement frame is the fact that to be able to work with the retrofit framework there needs to beless than 3 inches in the outside point where the flush fin will rest to the inside point in thearea where the old frame ends. Go more than 3 inches, with the retro if it‘s less than 3 inches, use the replacement frame and add trim to thesurface in lieu of the flush fin. I’m going to explain the procedure of removing the old aluminum window, next week.